lC7 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock models available pf series 5 tumbler miniature snap-in switchlocks features/benefits ? snap-in mounting ? multi-pole and multi-position ? positive detent typical applications ? computers ? point-of-sale terminals ? instrumentation specifications contact rating: q contact material: 4 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac (ul/csa). see page m-30 for additional ratings. electrical life: 10,000 make-and-break cycles at full load. contact resistance: below 10 m typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 min. dielectric strength: 1,000 vrms min. @ sea level. indexing: 45o 3 positions, 90?o positions. materials lock: 6/6 nylon with matte finish (ul 94v-2), black, 5 tumbler, single bitted lock with integral detent mechanism. keys: two nickel plated brass keys with black plastic head. switch housing: 6/6 nylon (ul 94v-2). contacts & terminals: q contact material: copper, silver plated. see page l-30 for additional contact materials. terminal seal: epoxy. note: any models supplied with q or b contact material are rohs compliant. note: specifications and materials listed above ar e for switchlocks with standar d options. for information on specific and custom switchlocks, consult customer service center . build-a-switch to order, simply select desired option from each category and place in the appropriate box. available options are shown and described on pages lC8 through lC0. for additional options not shown in catalog, consult customer service center. switch and lock function pf011u sp, 90oindex, keypull pos. 1 & 2 pf201u dp, 45oindex, keypull pos. 1 & 3 pf211u dp, 90oindex, keypull pos. 1 & 2 lock color 2 black key color 2 black keying e t wo nickel pla ted brass keys with insert molded plastic head terminations 03 solder lug with hole wc wire lead contact material q silver b gold lock t ype b 5 tumbler lock with detent lock finish m plastic lock with matte finish lock style k cone sha ped facing
lC 28 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock pf series 5 tumbler miniature snap-in switchlocks switch and lock function keying .615 (15,6 2) .080 x .020 (2,03 )x (0,51 ) .700 dia. .420 dia 1 2 3 4 5 6 7 8 .230 t yp (5,84 ) .163 (4,14) .625 po s .1 po s .2 .500 (12,7 0) .625 (15,8 8 ) dia (15,8 8 ? ) (10,6 7? ) (17,7 8? ) 22o 30' 45o 0' = detent positions (45 o or 90 o ) = key pull possible in these positions. = stop po sitions legend terminal nu mbers t erminal num bers molded on housing. e two nickel plated brass keys with insert molded plastic head 2 black key color option code note: all or ders keyed alike, standar d. for more than one key code, replacement keys, or other special features, consult customer service center. part number shown: pf011uebm03kq22 key part number: 334c1004102 keying key color 90o positions 1 & 2 1-3 1-3, 5-7 8-1 8-1, 4-5 pf011u pf211u sp dp 45o positions 1 & 3 2-3, 6-7 1-2, 5-6 8-1, 4-5 pf201u dp indexing lock configuration key pull positions connected terminals pos. 1 pos. 2 pos. 3 model no. no. poles single & double pole switches pos. 1 2 3 pos. 1 2 all models with all options when ordered with ?ontact material.
lC9 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock pf series 5 tumbler miniature snap-in switchlocks lock type lock finish terminations lock style ke y shown in posi ti on on e 5 tu mb le loc k align t ab w it h s lot and sn a p to g eth e r lock must be in pan el befo re att ach ing sw i tc h b a se sw i tc h b a se panel mounting pan el thickness: .050-.080 (1,27-2,03) .615 (15,6 2) .230 t yp (5,84 ) .500 (12,7 0) .625 (15,8 8 ) .163 (4,14 ) lock type lock color k cone shaped f acing wc wire lead 03 solder lug with hole m plastic lock with matte finish b 5 tumbler lock with detent switch and lock assembly instructions note: switch installation is permanent. switch cannot be removed from lock after assembly. attempts to separate switch and lock may damage switch. black wir e standar d, other colors and lengths available, consult customer service center. ul style 1015. option code lock color black 2
lC 30 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock pf series 5 tumbler miniature snap-in switchlocks contact material available hardware 1 contacts & terminals: copper, with gold plate over nickel plate. 2 cont acts & terminals: copper, silver plated (standard with all termination options). * note: see t echnical data section of this catalog for rohs compliant and compatible definitions and specifications. all models with all options when ordered with ?ontact material. key code: 041 p ar t no. (one key) 334c1004102 black material: brass finish: nickel plate 6/6 nylon insert molded head co n t ac t an d option co d e te rmin al mater ial r a ti n g q 4 a m ps @ 1 25 v a c o r 28 v d c ; 2 a m ps @ 2 50 v a c (ul/csa ). low leve l/ d ry cir cu it b si l ver 2 po wer 0.4 va m ax . @ 2 0 v a c o r d c m a x. rohs co m pl ian t* rohs co m patib l e* ye s ye s ye s ye s g old 1
|
